Reverend Warhawk DAW (Silver Burst)
Imagine the Reverend Warhawk, but sleeker and more vibrant. Thinner wings and more mass at the center ridge means tones are fuller. Add the Double Agent pickups, and you can explore all kinds of new auditory realms. The HA5 bridge humbucker and 9A5 neck P90 unite to give you warm, open, and clear tones with extra drive and punch. The Warhawk DAW includes the Wilkinson WVS50 IIK for aggressive whammy exercises. This guitar is meant for some serious playing.
CUSTOM PICKUPS
We design our own proprietary custom pickups, to achieve the best tonal match with our instruments. Reverend pickups are also specifically designed for each position, for balanced volume and tone when switching.
KORINA BODY
Korina (aka White Limba) is a medium-light weight wood, highly prized for consistency and tonal qualities. Often found in boutique and vintage instruments, all Reverends feature Korina bodies. A highly resonant wood, Korina is a key factor to producing our lively, responsive instruments that are rich in harmonics.
BASS CONTOUR
This passive bass roll-off is great for tightening up the low end, or re-voicing the pickups. It can make a humbucker sound like a single-coil, or give a P-90 that classic twang. Variable pickup voicing at your fingertips!
PIN-LOCK TUNERS
A thumbwheel under the tuner pushes a steel pin up through the post, locking the string in place for exceptional tuning stability and super-fast string changes.
INITIALED HEADSTOCK
Every Reverend is hand initialed and serial numbered on the back of the headstock by one of our highly skilled technicians who sets up, inspects, and tests every instrument.
WILKINSON WVS50 IIK TREMOLO
Features include saddles that lock to the baseplate, adjustable arm swing tension, and a push-in/no freeplay arm. Combined with our boneite nut and pin-lock tuners, it stays in tune even under aggressive whammy action.
VARI-CLAW TREMOLO CLAW
This innovative claw gives you the option of 3 springs in the middle for a firm tremolo feel, or 2 springs on the outside for a softer feel. The offset hook design lets you switch between 3 or 2 springs, with little or no cumbersome adjustment of the claw needed.
BONEITE NUT
We use "Boneite," a synthetic bone nut, that is more consistent than natural bone, on all Reverend instruments. It reduces friction, allowing the strings to slide through the nut slots smoothly, improving tuning stability.
DUAL-ACTION TRUSS ROD
Our dual action rod adjusts in both directions, allowing back bow or forward bow. This assures correct adjustment range is possible regardless of string tension, extreme climate conditions, or the effects of long term aging. It’s also located at the headstock for easy access.
CUSTOM JACK PLATE
Our proprietary jack plate features four mounting screws, instead of two. The extra screws prevent the plate from tearing out of the body. Made of steel for durability, the laser etched logo adds an extra touch of class!
PURE TONE JACK
All Reverends use an upgraded jack by Pure Tone Technologies. A standard jack has single contacts, but the Pure Tone jack has dual contacts for improved grip, audio signal and reliability. The most dependable guitar jack available.
TREBLE BLEED CIRCUIT
All Reverend guitars have a treble bleed circuit, preserving the treble when you roll back the volume control. When you roll back a standard volume control, the tone loses treble and becomes dull sounding. Now you can turn down and still sound great!
10% POTS
We use Alpha control pots with a +-10% rating. While a typical pot is +-20%, our pots are built to tighter specifications, making them more consistent. Typically used in expensive boutique guitars, but standard issue in all Reverends.
10% POLY CAPS
We use caps with a +-10% rating, while a typical cap is +-20%. Our caps are made to tighter specifications, so they’re more consistent. Made of polyester, they’re also longer lasting, and less affected by temperature than cheaper ceramic caps. Typically used in expensive boutique guitars.
CUSTOM DOME KNOBS
Our proprietary knobs feature a lower profile which is less likely to be accidentally hit by the player's hand, and the white dot lets you easily see where your knob rotation is set.
SPECIFCATIONS
| BODY | ||
| Body Shape: | Warhawk |
|
| Body Finish: | Gloss | |
| Body Wood: | Korina Solid Body | |
| NECK | ||
| Neck Wood: | Three Piece Korina | |
| Neck Finish: | Gloss |
|
| Fingerboard Wood: | Pau Ferro |
|
| Neck Back Shape: | Medium Oval | |
| Fingerboard Radius: | 12" | |
| Scale: | 24.75" | |
| Frets: | 22 - 0.110"W x 0.050"H | |
| Nut: |
43mm Width - Boneite
|
|
| ELECTRONICS | ||
| Bridge Pickup: | HA5 Bridge | |
| Neck Pickup: | 9A5 Neck | |
| HARDWARE | ||
| Tuning Machines: | Reverend Pin-Lock | |
| Bridge: |
Wilkinson WVS50 IIK Tremolo
|
|
| Color: | Chrome |